ACRA CONTROL

Knowledge Base

Filter By

FAQ Category

Home > FAQs

Frequently Asked Questions

This is the FAQ page. Here you will find the answers to Frequently Asked Questions.

Please Log In for access to content marked with a padlock icon

FAQ/002
What is the difference between DNC (Do not connect) and NC (Not connected) as a pin description in KAM-500 data sheets?
FAQ/003
How are the connector and module pinout numbered for a KAD connector?
FAQ/006
When opening some KSM-500 tools, I get a “Too many open files” error:
FAQ/007
During the KSM-500 installation the error: “Internal Error 2711” appears. How is this resolved?
FAQ/008
The message “‘37.202381’ is not a valid floating point value” appears when Frame Builder is run. How is this resolved?
FAQ/009
Error 1603 appears while installing KSM-500. How is this resolved?
FAQ/010
How can you change the revision of a PCM transmitter module, such as the KAD/BCU/101/C, in KSM-500 on an existing configuration while still preserving the PCM frame?
FAQ/011
What are the main improvements of the Series 100 family of analog modules?
FAQ/015
Can a differential input analog module be used by a single ended transducer?
FAQ/016
Which airborne qualified battery is suitable for use with KAD/TCG/001/C?
FAQ/026
Why is the checksum of the UDP packet from the KAD/ETH/101 and KAD/BCU/105/B modules always 0x0000?
FAQ/027
How close can KAM-500 chassis be to each other?
FAQ/031
Internal error occurs - Please notify ACRA CONTROL with the following info: File hwcal.app Line 296 – itsAddressCalSector==ADDRESS_CAL_TEMP
FAQ/033
Can I swap two modules with the same part number in the chassis without reprogramming the system?
FAQ/034
Can I upgrade a KAM module to a KAD module?
FAQ/035
What information should I provide to support@acracontrol.com if I want to report a software issue?
FAQ/036
Which XML parser do you recommend to parse a XidML file?
FAQ/037
In which order should I set up my modules in a chassis?
FAQ/038
What does the word 'ACRA' in the company name ACRA CONTROL mean?
FAQ/039
Can I have to different PCM stream coming out of the KAM-500 system?
FAQ/040
Can I swap two modules of the same type in my chassis without re-programming the system?
FAQ/041
Why is the green LED on my chassis blinking?
FAQ/042
How is the error “encountered impossible expiry” resolved?
FAQ/043
Why does ACRA CONTROL specify “Chassis” and not “Ambient” temperature on their datasheet?
FAQ/044
kProgram compile error for KAM/MEM/003 due to an excessive number of parameters logged in the memory
FAQ/045
What steps should be taken if the KAD/ARI/001 is not receiving expected messages?
FAQ/047
What are the details of the Audio format used by the KAD/VID/103?
FAQ/048
Is it possible to replace the Compact Flash® card in a KAD/MEM/004 Module?
FAQ/049
I’m using a KSM-500 software version for which the KAD/ADC/113/B is not supported. Could I reprogram the module type to a KAD/ADC/113?
FAQ/050
What should I do when the DOS window with the title “C:\Windows\microsoft.net\framework\ v2.0.50727\regasm” after KSM-500 installation doesn’t close?
FAQ/051
kProgram reports on the following error on the message server. How is it resolved?
FAQ/052
I am unable to import a MatLab mat-file generated by kFlashCardXID. The error is
FAQ/053
There is no KAM/ADC/113 available in kSetup, can I select the KAD/ADC/113
FAQ/054
What is happening when such a following internal error occurs?
FAQ/056
ACRA ERROR :: Cannot find next baudrate
FAQ/057
kProgram message error: ACRA ERROR :: Error programming loom 'acra_std_asys'
FAQ/058
What is happening when the following internal error occurs?
FAQ/059
What is happening when the following internal error occurs?
FAQ/060
What voltage I am measuring with my quarter-bridge?
FAQ/061
What is the real sampling frequency of a parameter that goes to different destinations at different rates? What is the real cut-off frequency of the filter?
FAQ/062
I’m having issues to get the lock with the GTS/DEC/00x when I’m using video parameters from the KAD/VID/103 in a PCM frame with PCM code NRZ-L. How I can resolve this?
FAQ/063
What are the details of the Audio format used by the KAD/VID/103?
FAQ/064
When I run Discover, I get this error message “Module in KAM-500 DAU 0 slot 3 has failed its bit walk test”. How can I resolve it?
FAQ/065
During the KSM-500 installation, the message: “Error 1905 (easygrid.ocx) ” appears. How is this resolved?
FAQ/066
How can I obtain a GS Works 7 evaluation license?
FAQ/067
I'm going to format my PC and I want to keep my GS Works 7 license. How can I maintain it?
FAQ/068
I can see the lock in GS Works but the SFID is incrementing incorrectly. What could be wrong?
FAQ/069
I’m using the KAD/ADC/109/B/S2 module. If I do not want to use the sense line, what do you recommend?
FAQ/070
I would like to transfer my GS Works license to a newer PC. What are the steps to follow?
FAQ/071
Could you give us more information on the Audio format used by the KAD/VID/103?

Knowledge Base

Filter By

FAQ Category

Frequently Asked Questions

Log In

Register